Description
FAQ
Review
Description
Description:
Compliant with PCI-Experss
Compliance with Serial ATA Specification 3.0
Bus Type of PCI Express X4 3.0 interface
The supported communication rates are 6.0 Gbps
Hot swap and heat exchange
Specification:
Main Control Chip: ASMedia ASM1166+JMicron JMB5xx
Ports: 10 SATA 6GB/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard drives
Compliant with PCI-E Specification V2.0 and backward compatible with PCI-E v1.x
PCI Express X4 Interface (compatible with 4X, 8X, 16X slots, the signal is actually 2X signal)Support Max 20TB Hard Disk
Note: MSI X470 and X570 are not compatible with this PCI-E Card
OS Support
System Requirements:Windows 10 / LinuxInterface: PCI Express x4 interface. Compatible with PCI-E X4,X8,X16 Slots
Installation instructions
1: Please clean the gold finger of SATA3.0 card by eraser , Plug the SATA cable of the chassis into the card.
then connect all the hard disks.
2: Turn off the power of the computer and open the back cover of the PC; Remove the bars corresponding to the free slot on the chassis.
3: Insert the expansion card into the corresponding PCI-E expansion slot of the host
4: Secure the iron strip of the expansion card to the chassis with a screwdriver.
5: Close the chassis and plug in the power cord to boot. After entering the system, install the driver
Driver Installation
1. Insert the companion drive CD into the CD drive;
2. Open "My Computer", find the location of the disc, open the disc;
3. Locate the "CD:\SATA CARD\Marvell\9215\drvsetup inside the .exe driver file;
4. Then follow the instructions of the computer to complete the installation, then restart the computer
Check the installation
Suitable for PCI-E card with ASMedia ASM1166+JMicron JMB5xx Chipset.
Open the "Device Manager", expand the "Universal Serial Bus Controller" option, if there is " ASMedia ASM1166 SATA 6G Controller", the hardware and driver are installed successfully; if there is "unknown device" or other information, the hardware or The driver did not install successfully.
If there is "Standard SATA AHCI Controller" hardware information under "Device Manager" or "IDE ATA/ATAPI Controller", that means the driver didn't installed under windows10.
Card layout
The illustration below shows the major components of the SATA 3.0 10 PORT expansion card.
Compliant with PCI-Experss
Compliance with Serial ATA Specification 3.0
Bus Type of PCI Express X4 3.0 interface
The supported communication rates are 6.0 Gbps
Hot swap and heat exchange
Specification:
Main Control Chip: ASMedia ASM1166+JMicron JMB5xx
Ports: 10 SATA 6GB/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard drives
Compliant with PCI-E Specification V2.0 and backward compatible with PCI-E v1.x
PCI Express X4 Interface (compatible with 4X, 8X, 16X slots, the signal is actually 2X signal)Support Max 20TB Hard Disk
Note: MSI X470 and X570 are not compatible with this PCI-E Card
OS Support
System Requirements:Windows 10 / LinuxInterface: PCI Express x4 interface. Compatible with PCI-E X4,X8,X16 Slots
Installation instructions
1: Please clean the gold finger of SATA3.0 card by eraser , Plug the SATA cable of the chassis into the card.
then connect all the hard disks.
2: Turn off the power of the computer and open the back cover of the PC; Remove the bars corresponding to the free slot on the chassis.
3: Insert the expansion card into the corresponding PCI-E expansion slot of the host
4: Secure the iron strip of the expansion card to the chassis with a screwdriver.
5: Close the chassis and plug in the power cord to boot. After entering the system, install the driver
Driver Installation
1. Insert the companion drive CD into the CD drive;
2. Open "My Computer", find the location of the disc, open the disc;
3. Locate the "CD:\SATA CARD\Marvell\9215\drvsetup inside the .exe driver file;
4. Then follow the instructions of the computer to complete the installation, then restart the computer
Check the installation
Suitable for PCI-E card with ASMedia ASM1166+JMicron JMB5xx Chipset.
Open the "Device Manager", expand the "Universal Serial Bus Controller" option, if there is " ASMedia ASM1166 SATA 6G Controller", the hardware and driver are installed successfully; if there is "unknown device" or other information, the hardware or The driver did not install successfully.
If there is "Standard SATA AHCI Controller" hardware information under "Device Manager" or "IDE ATA/ATAPI Controller", that means the driver didn't installed under windows10.
Card layout
The illustration below shows the major components of the SATA 3.0 10 PORT expansion card.
FAQ
Review
Review
Send your message to us
