Description
FAQ
Review
Description
Specification
Product name: PCIE 4.0 x4 to x4 extension cable
Product model:
PCIE 4.0 X4 180180
PCIE 4.0 X4 90180
PCIE 4.0 X4 18090
PCIE 4.0 X4 180180
PCIE 4.0 X4 90180
PCIE 4.0 X4 18090
PCIE 4.0 X4 9090
Transfer speed: PCIE 4.0 x4 full speed
Cable length: 0.1M~ 1.2M, the length can be customized
Applicable matching cards: wireless network card, wired network card, capture card, USB card, solid state hard disk card, as long as the PCIe card is x4 and the motherboard slot is x4 interface can support.
Cable length Description:
The length of the wire in our shop refers to the part of the visible wire, excluding the PCB and the connector, if it contains the PCB and the connector, add about 3cm. The total length is about 8cm, please refer to the 5cm dimension in the figure below.
Cable length: 0.1M~ 1.2M, the length can be customized
Applicable matching cards: wireless network card, wired network card, capture card, USB card, solid state hard disk card, as long as the PCIe card is x4 and the motherboard slot is x4 interface can support.
Cable length Description:
The length of the wire in our shop refers to the part of the visible wire, excluding the PCB and the connector, if it contains the PCB and the connector, add about 3cm. The total length is about 8cm, please refer to the 5cm dimension in the figure below.
1. What is the quality of the wire? Is there a shield?
There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable.
There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable.
2. Is the wire soft? Can it be bent?
The cable is the fourth-generation PCIe dedicated cable . The black cable has a thickness of 1.3mm. The cable can be bent or folded without affecting the use.
3. Why is the performance poor after connecting the extension cord? Or is it stuck slowly or not working?
When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:
1. The extension cable is assembled incorrectly. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.
2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.
3. The motherboard is aging, the graphics card is aging, and the equipment is more than 4 years old and does not support the use of extension cords. Please use at a lower speed if the equipment is aging or the signal is poor
4. Product advantages:
1. Cable advantage, the fourth-generation shielded high-speed cable , using high-quality connectors, high-frequency support PCIe 4.0 x4 Gen4 stable transmission
2. Cable length advantage, from 5cm to 120cm can be customized, the adapter sold in our shop, the cable impedance is low, the cable length within 60cm can stably support PCIe4.0 full speed.
3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.
4. The PCB uses high-quality materials with high frequency and low resistance. The PCB is made of high-quality materials. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content. The crash of the sound problem.
5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem.
6. The PCB is short and fat design, which will not get stuck to the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage
The cable is the fourth-generation PCIe dedicated cable . The black cable has a thickness of 1.3mm. The cable can be bent or folded without affecting the use.
3. Why is the performance poor after connecting the extension cord? Or is it stuck slowly or not working?
When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:
1. The extension cable is assembled incorrectly. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.
2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.
3. The motherboard is aging, the graphics card is aging, and the equipment is more than 4 years old and does not support the use of extension cords. Please use at a lower speed if the equipment is aging or the signal is poor
4. Product advantages:
1. Cable advantage, the fourth-generation shielded high-speed cable , using high-quality connectors, high-frequency support PCIe 4.0 x4 Gen4 stable transmission
2. Cable length advantage, from 5cm to 120cm can be customized, the adapter sold in our shop, the cable impedance is low, the cable length within 60cm can stably support PCIe4.0 full speed.
3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.
4. The PCB uses high-quality materials with high frequency and low resistance. The PCB is made of high-quality materials. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content. The crash of the sound problem.
5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem.
6. The PCB is short and fat design, which will not get stuck to the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage
Package:
1 x PCI-E 4.0 X4 Extension Cable
FAQ
Review
Review
Send your message to us