Specification:
Wire Material：Imported tinned shielded copper wire from Germany
The thickness of the wire is 1.4MM
Connector 1: PCIe x16 Male (3U PCI-E X16 Gold Finger)
Connector 2: PCIe x16 Female（LOTES PCI-E 16X Slot）
Max Current: 3A Max Speed: 8Gbps x 16=128Gbps Wire length: 10 ~ 100 cm, the length can be customized, welcome to contact our Customer service.
Advantage: Test 100CM PCI-E 3.0 16X Extender Cord ,100% full Speed absolutely .
Suitable Graphics Card: (Most RTX 2080Ti Graphics Cards), GTX1080Ti, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional Graphics Card, support for all the PCIe Cards after 2015 years.
Please buy sample to test firstly before place bulk order , because some customer feedback that part of RTX 2080Ti Graphics Cards don`t work. Bandwidth speed: PCIe 3.0 x16 (GEN3, 128Gbps), if you want to use PCI-E 4.0 Devices or other devices ,please set the motherboard BOIS, set PCIe option to PCI-E 3.0 (PCI-E GEN3).
Choose the appropriate Graphics Card extension cable according to your chassis model.
Support 99% ATX ITX Chassis / Case in whole market.
1. Product advantage:
A. Wire advantages: using the imported shielded copper wire from Germany, using the LOTES connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8Gs stable transfer. B. Cable length: from 10 cm to 100 cm can be customized, our wire has a low impedance, the cable below 100cm can be stable at PCIe 3.0 full speed reading and writing. C. Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability. D. PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen.
2.How about the quality of the wire? The thickness of the wire is 1.4mm, hardness is harder, can bend can fold, does not affect use .Our cable is EMI shielding, Uses the advanced EMI shielding conductive polymers, new type of material used for EMI shielding, flat cable design.This technology allows each cable is completely covered by electromagnetic interference shielding of the conductive polymer, little interference and performance degradation, and reduce the weight of the expander.
3. How about the compatibility of our cable? Support for most types of high-end Graphics Cards, do not pick the card, there is no compatibility problems. Notice : Most RTX 2080Ti GPU can run on PCI-E 3.0 16X Extension Cable.
4. Why does our pcie extension cord have a loss problem? The shorter the wire, the stronger the signal. The longer the wire, the signal attenuation, interference and signal delay will become apparent, this three big problem is the cause of the loss occurred.The wire length below 100cm can run at PCIe 3.0 full speed, more than 100cm signal attenuation. Extended lines 10cm long loss of about 0.1%, 20cm long loss of about 0.2%, 30cm long loss of about 0.3%.
5. Why x16 graphics card measured only x4 or x8? Although our motherboard has 16x interface ,the motherboard PCIe slots pins may not have full, it can not achieve x16, only x4 or x8 speed. So it influences graphics card performance. Product performance measurement: x1 30%; x2 55%; x4 90%; x8 99.5%; x16 100%.
