Description
FAQ
Review
Description
Specification
Product Name: M.2 NVMe SSD Extension Cable
Cable length: 5cm ~100cm
Adapted hard drive: support M.2 NVMe, Ultra SSD solid state drive,
Bandwidth speed: PCIe 3.0 x4 full speed, transmission rate 32Gbps.
Restrictions on use: Only for professional engineers to specify purchase, general use is not suitable for use, ordinary buyers should not buy.
Cable length: 5cm ~100cm
Adapted hard drive: support M.2 NVMe, Ultra SSD solid state drive,
Bandwidth speed: PCIe 3.0 x4 full speed, transmission rate 32Gbps.
Restrictions on use: Only for professional engineers to specify purchase, general use is not suitable for use, ordinary buyers should not buy.
Purchasing Tip: Be sure to buy 1~2 samples first and then purchase them in large quantities after verification.
Friendly Tip: This product has many compatibility problems. If you assemble it incorrectly or improperly, it will burn your
device. Professional engineers are authorized to purchase. This product is a product that is not refundable, please consider and confirm the order and then purchase.
Product Advantages:
1. Wire advantage, using German patented imported wire, using Taiwan imported Lotes connector, high frequency support PCIe 3.0 8G/bps stable transfer
2. Line length advantage, from 5CM to 100CM can be customized, the shop sells the patch cord, the wire impedance is low, the cable length within 60cm supports PCIe 3.0 full speed.
3. The differential signal has no via design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit, and the product is durable.
4. The product uses high-quality materials, PCB workmanship precision, copper thickness is thickened to 1oz, gold finger gold content is sufficient, gold-plated foot has good electrical conductivity, can reduce the blue screen of the crash caused by the increase of oxidation and rust resistance. Stable at full speed, no need to slow down, there is no compatibility problem.
5. The wire used in the product itself is very durable. It is protected by a PCB gasket with a thickness of 3mm at the metal
welding point, and is fastened with screws and hex nuts. The product is strong and reliable, resistant to pulling, anti-interference, and will not be broken. The nail problem. The wire can be bent and folded without affecting the use.
6. PCB dwarf and fat design, dwarf will not get stuck to the graphics card, add fat and long design to make the board easier to install, reducing the chance of damage.
1. Wire advantage, using German patented imported wire, using Taiwan imported Lotes connector, high frequency support PCIe 3.0 8G/bps stable transfer
2. Line length advantage, from 5CM to 100CM can be customized, the shop sells the patch cord, the wire impedance is low, the cable length within 60cm supports PCIe 3.0 full speed.
3. The differential signal has no via design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit, and the product is durable.
4. The product uses high-quality materials, PCB workmanship precision, copper thickness is thickened to 1oz, gold finger gold content is sufficient, gold-plated foot has good electrical conductivity, can reduce the blue screen of the crash caused by the increase of oxidation and rust resistance. Stable at full speed, no need to slow down, there is no compatibility problem.
5. The wire used in the product itself is very durable. It is protected by a PCB gasket with a thickness of 3mm at the metal
welding point, and is fastened with screws and hex nuts. The product is strong and reliable, resistant to pulling, anti-interference, and will not be broken. The nail problem. The wire can be bent and folded without affecting the use.
6. PCB dwarf and fat design, dwarf will not get stuck to the graphics card, add fat and long design to make the board easier to install, reducing the chance of damage.
Purchase Notes:
1. When inserting the cable, be sure to recognize the direction. Do not insert the offset to prevent the
device from being burnt. When plugging the cable, first hold the socket of the device and then plug the cable, so as to avoid
excessive force and interrupt the socket pin.
2. Various motherboards and equipment signal driving capabilities are different. The results of our test are not guaranteed to be consistent with your test results. As long as the extension cable is connected, the signal will be worn out. If you ask, please do not buy.
3. The graphics card or motherboard is an electronic product that will age and oxidize over time, and does not support old
equipment. More than four years. Do not buy.
4. Only the engineering personnel can specify the purchase, no DIY ability, can not install by themselves, please do not buy
5. If your SSD is a two-notch SATA SSD, not compatible, please do not buy
Support for a gap M-key NVMe SSD; does not support two gaps BM-key SATA SSD
1. When inserting the cable, be sure to recognize the direction. Do not insert the offset to prevent the
device from being burnt. When plugging the cable, first hold the socket of the device and then plug the cable, so as to avoid
excessive force and interrupt the socket pin.
2. Various motherboards and equipment signal driving capabilities are different. The results of our test are not guaranteed to be consistent with your test results. As long as the extension cable is connected, the signal will be worn out. If you ask, please do not buy.
3. The graphics card or motherboard is an electronic product that will age and oxidize over time, and does not support old
equipment. More than four years. Do not buy.
4. Only the engineering personnel can specify the purchase, no DIY ability, can not install by themselves, please do not buy
5. If your SSD is a two-notch SATA SSD, not compatible, please do not buy
Support for a gap M-key NVMe SSD; does not support two gaps BM-key SATA SSD
FAQ
Review
Review
Send your message to us
