Description
FAQ
Review
Description
1. Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+)
2. Supports the following brand M.2 5G Modules Quectel: RM500Q RM500U Gosuncn: GM800 Sierra : SIM8200
3. Compatible the following brand Boards 01. Raspberry Pi 4, 3, 2, B+ 02. Asus Tinker Board 03. Rock 64*
4. Samsung ARTIK’s board 5. Latte Panda 4. Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
5. NANO SIM Card socket can easily reachable on the upside of the HAT.
6. Efficient and low quiescent current power circuit can hold up to 3Amps
7. Working temperature range: -40°C ~ 80°C
Note 1:
2. Supports the following brand M.2 5G Modules Quectel: RM500Q RM500U Gosuncn: GM800 Sierra : SIM8200
3. Compatible the following brand Boards 01. Raspberry Pi 4, 3, 2, B+ 02. Asus Tinker Board 03. Rock 64*
4. Samsung ARTIK’s board 5. Latte Panda 4. Clip-in M.2 socket compatible with worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage with regional or global modules which work with different frequencies & carriers
5. NANO SIM Card socket can easily reachable on the upside of the HAT.
6. Efficient and low quiescent current power circuit can hold up to 3Amps
7. Working temperature range: -40°C ~ 80°C
Note 1:
The Base HAT doesn’t need driver. Rather The host computer(such as RPi, Asus Tinker Board) needs the driver of the compatible module that will be used with the Base HAT. For example, if you are using Quectel’s EC25 with the Base HAT, then your host device should have the driver for Quectel EC25. Nowadays, most of the Linux kernel comes with the required drivers installed as a result the modules are recognized.
Note 2:
These compatibility list created by assuming you’ve connected the Base HAT to the device via USB. UART communication can be work with every device in the list easily which have 3.3V level UART port.
Package Content:
1 x 5G/4G 1 x USB 2.0 to TYPE C Cable
1 x USB 3.0 to USB 3.0 Cable
1 x Screw Driver
8 x copper nut
8 x M2.5 screw
1 x Quick installation Guide.
Package Content:
1 x 5G/4G
1 x USB 3.0 to USB 3.0 Cable
1 x Screw Driver
8 x copper nut
8 x M2.5 screw
1 x Quick installation Guide.
FAQ
Review
Review
Send your message to us